Plastic Film-Laminated Steel Sheets
Polyolefin-based plastic film-laminated steel sheets
HISHIMETAL PO incorporates galvanized steel sheets, stainless steel sheets, and aluminum alloy sheets as a base material.
HISHIMETAL PO is a composite material produced by laminating a polyolefin-based film onto the base material.
This material is used for interior and door etc.
- This material can be customized with the same variety of patterns and embossings as with PVC.
- This material has excellent chemical and solvent resistance.
- Interior applications
Curtain rails, closets, etc.
- Exterior applications
- Light electrical appliances
- Curtain rails
- Closet doors
Manufacturing Range and Order Conditions
A lot of 2.5 tons or more is required to order a product having the same specifications such as the same sheet thickness, width, color and embossing.
* Please order in lots of at least 2.5 tons as special request lots smaller than this will require an extra fee.
The standard lead time is 30 to 45 days. This can vary depending on the specification of the order.
* Specifications of new orders requires a confirmation procedure, and so we recommend placing new orders as early as possible.
* Table can be scrolled horizontally
|Specific test||Test conditions||Criteria||HISHIMETAL PO|
6 mm extrusion
|25±5°C||No separation||Nothing abnormal|
|Bendability||Adhesion and bending test||25±5°C, 0T||No cracking, breakage, and separation||Nothing abnormal|
|Processability at low temperature||90° bend test||0±1°C, R=2||No cracking, breakage, and separation||Nothing abnormal|
|Resistance to boiling water||Dipping in boiling water||Submerged in water for 5 minutes after 60 minutes of immersion||No shrinkage, cracking, breakage, creasing, separation, and marked fading||Nothing abnormal|
|Chemical resistance||5-minute immersion
|10% hydrochloric acid||No rust, stain, and marked fading||Nothing abnormal|
|Saturated calcium hydroxide|
|10% sulfuric acid|
|Aqueous solution of sodium hydroxide (100 g/L)|
|Corrosion resistance||Complies with salt spray test
JIS Z 2371
|JIS K 6744
Type B: 1,000 hours
|No rust||Nothing abnormal|
*1 The data described above represents the specified values in our company and does not represent guaranteed values.
*2 Please contact us to inquire on the certification of fire-resistant materials.
Designed materials Department